Résistif 5 fils

Dalle Tactile Résistive 5 Fils

Print

 

 5-wire resistive touchscreens are proven performers in high-use, long-life applicationswhere there is a low risk of incidental or purposeful damage. Typical applications include: point-of-sale (POS), industrial control (MMI), medical equipment, e-government kiosks, lottery terminals, home automation and general office use.

Compared with other touch technologies, 5-wire resistive provides high accuracy, excellent stability over long periods of time, superior resistance to typical cleaning materials, easy integration, IP65 sealability and the largest range of possible touch input methods (finger, fingernail, pen, plastic card, gloved finger, etc.)

From 7" to 24" for LCD

 

 

 

  

Electrical 
Operation Voltage DC5V
Linearity1.5% or less
Insulation≥20MΩ/25V (DC)
  
Optical 
Transmittance82% ± 5%
  
Environmental 
Operating Temperature -10°C to +60°C
Storage Temperature -40°C to +75°C
  
Mechanical  
Activation Force ≤50g
(Custom activation force and palm rejection available) 
  
Durability  
Finger Touch 35M touches
Pen Hitting 10M touches
Surface Hardness ≥3H (JIS K5400)
  

 

Controller Specifications 

ower Requirements+5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple)
Operating Temperature0 to 70 degrees Centigrade
Storage Temperature-40 to 80 degrees Centigrade
Relative Humidity95% at 60 degrees Centigrade
Protocol1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit
2. USB: USB 1.1 Low speed
3. PS/2: PS/2 mouse
 
 
Resolution2048 x 2048 
Accuracy ToleranceMax. +/- 0.5% tolerance
Report Rate1. RS232: Max. 160 points/sec
2. USB: Max. 160 points/sec
3. PS2: Max. 140 points/sec
Response TimeMax. 35 ms
Regulatory ApprovalsFCC-B, CE
 Panel Resistance 50 ~ 900 ohm (pin to pin on the same layer, touch resistance under 2k ohm )

 

 

 

 

 


 

 

 

 

 

 

 

Read more...